MPP Solar PIP-MS 1-5KVA Guide d'installation télécharger pdf (Page 2)

Step 3: Remove two screws as below chart and remove 2-pin and 14-pin cables. Take out the board under the

communication board.

Step 4: Remove two screws as below chart to take out cover of parallel communication.

Step 5: Install new parallel board with 2 screws tightly.

Step 6: Re-connect 2-pin and 14-pin to original position.

Parallel board Communication board

1 2 3 4 5 6 7 ... 15 16

Pas de commentaire

MPP Solar PIP-MS 1-5KVA Guide d'installation Page 2